Dtmf Calls - Kenwood TK-7360 Instruction Manual

S D /A
CAN ELETE
You can add and remove zones and/or channels/group IDs to and from your scan
lst.
1 Select your desred zone and/or channel/group ID.
2 Press the key programmed as Scan Delete/Add to remove a channel or press
and hold the key for approxmately 1 second to remove a zone.
• When a channel s added to scan, the
• When a zone s added to scan, the
S R
CAN EVERT
The Scan Revert channel s the channel selected when you press the PTT swtch
to transmt durng scan. Your dealer can program one of the followng types of
Scan Revert channels:
• Selected: The last channel selected before scan.
• Selected + Talkback: Same as "Selected", plus you can respond to calls on the
channel at whch scan s paused.
• Priority: The Prorty channel.
• Priority + Talkback: Same as "Prorty", plus you can respond to calls on the channel
at whch scan s paused.
• Last Called + Selected: The last channel on whch you receve a call or the last
channel selected before scan, whchever operaton occured latest.
Note: To make DTMF calls, you must use an optonal mcrophone wth a DTMF keypad.
M D
ANUAL IALING
1 Press and hold the PTT swtch.
2 Enter the desred dgts usng the keypad.
• If Keypad Auto-PTT s enabled by your dealer, you do not need to press the PTT
swtch to transmt; you can make the call smply by pressng the keys.
A
UTODIAL
Autodal allows you to quckly call DTMF numbers that have been programmed
onto your transcever.
1 Press the key programmed as Autodial.
(if the key assignment list selection is configured as "Enabled") or
2 Press /
<B/C> to select an autodal lst number.
• You can also enter a number from 01 ~ 16 drectly usng the keypad.
3 Press the PTT swtch to make the call.
8
DD

DTMF CALLS

con appears on the dsplay.
con appears on the dsplay.