Table of Contents
Advertisement
Note: To make DTMF calls, you must use an optional microphone with a DTMF keypad.
S
& S
tore
end
1 Enter up to 6 digits using the keypad.
2 Press the PTT switch to transmit the entered digits.
m
d
AnuAl
iAling
1 Press and hold the PTT switch.
2 Enter the desired digits using the keypad.
• If Keypad Auto-PTT is enabled by your dealer, you do not need to press the PTT
switch to transmit; you can make the call simply by pressing the keys.
A
utodiAl
Autodial allows you to quickly call DTMF numbers that have been programmed
onto your transceiver.
1 Press the microphone
• "Ad" appears on the display.
2 Enter the desired memory location number ( ~ 9).
3 Press the PTT switch to make the call.
r
ediAling
1 Press the microphone
• "Ad" appears on the display.
2 Press the microphone 0 key.
• If there is no data in the redial memory, an error tone will sound.
3 Press the PTT switch to make the call.
Note: Switching the transceiver power OFF clears the redial memory.
S
tun
This function is used when a transceiver is stolen or lost. When the transceiver
receives a call containing a stun code, the transceiver becomes disabled. The
stun code is cancelled when the transceiver receives a call with a revive code.
• "St" appears on the display while the transceiver is stunned.
DTMF CALLS
key.
key.
7
Advertisement
Table of Contents
