Maintenance; Maintenance Schedule - RIDGID GP90150A Operator's Manual

Maintenance

Release all pressure from the
system before attempting to
install, service, relocate or per-
form any maintenance.
In order to maintain efficient operation of
the compressor system, check the air fil-
ter weekly (per maintenance schedule),
oil level and gasoline level before each
use. The ASME safety valve should also
be checked weekly. Pull ring on safety
valve and allow the ring to snap back to
normal position. This valve automatically
releases air if the tank pressure exceeds
the preset maximum. If air leaks after the
ring has been released, or the valve is
stuck and cannot be actuated by the ring,
the ASME safety valve MUST be
replaced.
With engine OFF, clean debris from
engine, flywheel, tank, air lines and
pump cooling fins.

Maintenance Schedule

Operation
Check Oil Level
Drain Tank
Check Air Filter
Check Safety Valve
Blow Dirt From Unit
Check Belt Tightness
Change Oil
Do not attempt to tamper with
the ASME safety valve!
Daily Weekly Monthly 3 Months
G
G
G
G
G
13
G
G