System Setup Menu - Ricoh Aficio SP 5100N User Manual

System Setup menu

Use the 5. System Setup menu to configure a variety of printer features.
Item
Date & Time See page 10.5 and 10.6.
Form Menu
Note
Select Form • This menu item is available when the
optional hard disk is installed.
Language
Values: English, FRANCAIS, Espanol,
Portugues E., Portugues B., Deutsch, Italiano...
This setting determines the language of the text
that appears on the control panel display and
information printing.
Power Save
Values: [ 5 ] Min, [ 10] Min, [ 15 ] Min, [ 30 ] Min,
[ 60 ] Min, [ 120 ] Min
When the printer does not receive data for an
extended period of time, power consumption is
automatically lowered. You can set how long the
printer waits before going to power save mode.
Auto
Values: Off, On
Continue
This item determines whether or not the printer
continues printing when it detects the paper
unmatched to your paper setting.
• Off: If a paper mismatch occurs, an error
message will remain on the display and the
printer will remain off-line until you insert the
correct paper.
• On: If the paper mismatch occurs, an error
message will display. The printer will go offline
for 30 seconds, then automatically clear the
message and continue printing.
Altitude Adj.
Values: Plain, High, Higher, Highest
You can optimize print quality according to your
altitude.
Auto CR
Values: LF, LF+CR
This item allows you to append the required
carriage return to each line feed.
Refer to the following samples:
AA
BB
CC
LF
Explanation
AA
BB
CC
LF+CR
Item
Job Timeout
Values:[0-1800] sec:15
You can set the length of time the printer waits
before printing the last page of a print job that
does not end with a command to print the page.
When a print time-out occurs, the printer prints the
page in the print buffer.
Maintenance This item allows you to maintain your printer.
•
Clean Drum
cartridge and produces a cleaning sheet with
toner debris on it.
• Clean Fuser
printer and produces a cleaning sheet with
toner debris on it.
•
CLR Empty MSG.
Replace Toner
display. Once you have selected On, this
setting will be permanently written to the
memory of the toner cartridge, and this menu
will be disappeared from the
menu.
•
Supplies Life
pages have been printed and how much toner
are left in the cartridge.
Clear Setting This menu item allows you to restore the printer's
factory default settings.
2.5
<System setup>
Explanation
: Cleans the OPC drum of the toner
: Cleans the fuser unit inside of the
: Prevents the
Toner Low
message from appearing on the
Maintenance
: Allows you to check how many