Adding Paper, Toner And Staples; Loading Paper; Loading Paper Into Paper Trays - Ricoh 8025e Troubleshooting Manual

6. Adding Paper, Toner and
This chapter describes troubleshooting procedures that are applicable to all the
machine's functions.

Loading Paper

This section describes what to do when paper runs out and needs reloading.
Note
❒ Fan the paper before loading.
❒ Straighten curled or warped paper before loading.
❒ For paper types and sizes, see "Copy Paper", About This Machine.
Reference
"Copy Paper", About This Machine

Loading Paper into Paper Trays

This section describes how to load paper into the paper trays.
Important
❒ If you add paper to a paper tray with paper left inside, a misfeed might occur.
❒ Do not stack paper over the limit mark.
❒ When loading small quantities of paper, be careful not to squeeze the side
guide in too tightly, as the paper will not feed properly.
A
Pull out the paper tray until it stops.
B
Square the paper and load it in the tray with the copying face up.
C
Push the paper tray in until it stops.
Reference
p.77 "Changing the Paper Size"
p.80 "Changing to a size that is not indicated on the paper size selector"
ZEWY100E
Staples
73