EverFocus VANGUARD 16x8 User Manual page 34

To set up Preset Points:
1. Select a preset number (1-255) by clicking on the No. input box.
2. Set up a dwell time for this preset number.
3. Use the direction buttons or Zoom/Focus/Iris buttons to search for the location for this
preset number.
4. Click the Set button to save this preset point and then jump to the next preset number for
configuration. Follow Step 2-3 to set up multiple preset points.
5. After setting up the preset points, click the Save button to save the settings.
6. To clear the setup preset points, select a preset number and then click Clear.
To perform the Tour function:
1. Set up the preset points in advance. Please refer to the steps of "To set up Preset Points"
above.
2. Click the Start Tour button
3. To stop the Tour function, click the Stop Tour button.
To perform the Go to Preset Point function:
1. Set up the preset points in advance. Please refer to the steps of "To set up Preset Points"
above.
2. Select a preset number (1-255) by clicking on the No. input box.
3. Click the Go button.
VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
.
25