EverFocus VANGUARD 16x8 User Manual page 135

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
Full Screen: Switch to the right to enable the function. When a motion event occurs, the
corresponding channel with the motion event will be switched to full screen on the live
screen.
Recording Channel: Check the All checkbox to select all channels. When a motion event
occurs, the selected channel(s) will be recorded.
Analog/IP Channels: Check the checkbox to select all channels or check the desired channel
checkboxes. When a motion event occurs, the selected channel(s) will be recorded.
Preview Window: Click All to select all area to applied with the motion detection function.
Or use your mouse to draw an area on the preview window. Click Clear to clear the setting.
Click Save to save the settings or Refresh to refresh the page.
Click Copy to apply the same configurations from the current channel to the desired
channels. Select the desired channel(s) and then click the Copy button, the selected
channel(s) will be applied with the same configurations.
126