EverFocus VANGUARD 16x8 User Manual page 29

10. After clicking the OK button, the system will enter the Live View window (refer to 3.2 Live
View Window). Now you can start using the DVR.
Note:
1. If no HDD has been connected to the system, a warning message will pop-up. Click X to
close the warning message. If you want to perform the recording function, you will have
to connect the HDDs to the system.
2. If multiple HDDs have been connected to the system, the system will automatically
detect the connected HDDs when system starts up. The status of the connected HDDs
will be display in the Disk Warning window. Take the below image for example, HDD1 has
not been formatted; HDD2 is running normally (in recording state).
VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
20