EverFocus VANGUARD 16x8 User Manual page 106

Direction Buttons: Click the direction buttons to force the PTZ camera to turn to the direction.
Auto Pan: Click to start the Auto Pan function. Click again to stop the Auto Pan function.
Speed: Slide the bar to the left or right to adjust the control speed.
Zoom: Click + or – to zoom in or zoom out.
Focus: Click + or – to focus near or focus far.
Iris: Click + or – to adjust the Iris.
Preset Control: You can set up preset points here and then operate the Preset function.
Please see the below steps for more details.
Tour Control: To perform this function, the Tour function must be enabled (Settings >
Storage/PTZ > PTZ > Tour). After setting up the preset points, you can perform the Tour
function. Click to start the Tour function, click
To set up Preset Points:
1. Select a preset number (1-255) by clicking on the Preset input box.
2. Use the direction buttons or Zoom/Focus/Iris buttons to search for the location for this
preset number.
3. Click the + button to add this preset point, and the number will jump to the next preset
number for configuration. Follow Step 2-3 to set up multiple preset points.
4. To clear the setup preset points, select a preset number and then click the
To perform the Go to Preset Point function:
1. Select a preset number (1-255) by clicking on the Preset input box.
2. Click the Go to button
VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
.
97
to stop the Tour function.
button.