EverFocus VANGUARD 16x8 User Manual page 44

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
Call Monitor Setting
Video Output: Select CVBS/Call Monitor Output and then configure the below Call Monitor
settings.
CVBS Output: Select Enable to enable the Call Monitor function.
Sequence Mode: Select Enable to enable the Sequence Mode on Call Monitor. Select
Disable to disable the Sequence Mode on Call Monitor.
View Mode: This function will only be displayed when Disable is selected in the Sequence
Mode field, you can configure the view mode for the Call Monitor. Select a layout from the
drop-down list and then click Layout Settings to assign channels to the layout.
Sequence Layout: If Sequence Mode is enabled, you can further setup Sequence Layout.
Select a layout for the sequence mode. For example, if you select Layout4, the DVR will
display a quad view layout for all channels in sequence order. You can also click Sequence
Settings to assign channels to the layout.
Sequence Dwell Time: If Sequence Mode is enabled, you can further setup Sequence Dwell
Time. Select a sequence dwell time in second. By default, 5 seconds is set up.
Full Screen Trigger: Select Enable to enable Full Screen of the triggered channel.
Click Default to return to factory default value, Save to save the settings, or Cancel to cancel
and leave the page.
35