10.3 Alignment parameters
The "alignment point" is defi ned as the position inside the ticket to use for the notch alignment.
The distance between the notch edge and the alignment point is defi ned as "Notch Distance".
Referring to the front of the notch, the value of "Notch Distance" varies according to emulation set:
- VKP80III emulation:
- VKP80II emulation:
If the "Notch Distance" value is set to 0, the alignment point is set at the beginning of the notch.
positive values
of "Notch Distance"
88
"Notch/Distance" value varies from -5mm minimum and 99.9mm maximum
"Notch/Distance" value varies from 0mm minimum and 32mm maximum.
Alignment
point
+
Alignment
Alignment
point:
point
notch front
-
0
PRINTING DIRECTION
negative values
of "Notch Distance"