Cleaning - Custom Audio Electronics VKP80III User Manual

6.2 Cleaning

For periodic cleaning of the device, see the instructions below
Sensors
1
Disconnect the power supply cable and
open the device cover (see par. 4.4)
2
Clean the device sensors
by using compressed air.
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the device.
Alcohol, solvent c c o o h h o o l l , s s o o l l ve cohol, solve
52
ve
Paper path
1
Disconnect the power supply cable and
2
Remove any scraps of paper and the accumulated
paper dust on the paper mouths, on the printing roller,
on the cutter and on the area around the sensors.
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the device.
ON
open the device cover (see par. 4.4)
Alcohol, solvent c c o o h h o o l l , s s o o l l ve cohol, solve ve
ON