3 INSTALLATION
3.1 Fastening
The device is provided with three fi xing holes on the bottom of device (see following fi gure). To fasten the device on a
panel, use three M4 screws.
9,5
85,5
E
E
It's very important to consider the screws length not to damage the internal components placed near the fi xing holes (see
following fi gure).
Section E-E
Decive chassis
Fixing panel
Fixing screw
The screw length (L) will be calculated according to the thickness of the panel (Sp) on which the device is fi xed, as follows:
L ≤ 13mm + Sp
For example, if panel thickness is 10mm (Sp = 10mm), the maximum length for screws will be 23mm.
19