Installation Checklist; Creating A Site Log - Cisco ASR 903 Installation Manual

Installation Checklist

Installation Checklist
To assist you with your installation and to provide a record of what was done by whom and when, photocopy
the Cisco ASR 903 Router Installation Checklist shown in the table below. Use this to record the completion
and verification of each procedure. After the checklist is completed, place it in your Site Log along with the
other records pertaining to your new Cisco router.
Table 14: Cisco ASR 903 Router Installation Checklist
Task
Date on which chassis received
Chassis and all accessories unpacked
Types and numbers of interfaces verified
Safety recommendations and guidelines reviewed
Installation Checklist copied
Site Log established and background information entered
Site power voltages verified
Site environmental specifications verified
Required passwords, IP addresses, device names, and so on, available
Required tools available
Network connection equipment available
Cable-management brackets installed (optional, but recommended)
AC power cables connected to AC sources and router
DC power cables connected to DC sources and router
Network interface cables and devices connected
System power turned on
System boot complete (STATUS LED is on)
Shared port adapters are operational
Correct software configuration displayed after system banner appears

Creating a Site Log

The Site Log provides a record of all the actions related to installing and maintaining the router. Keep it in
an accessible place near the chassis so that anyone who performs tasks has access to it.
Cisco ASR 903 and ASR 903U Aggregation Services Router Hardware Installation Guide
66
Verified By Date
Preparing for Installation