Cisco ASR 903 Installation Manual page 105

Installing the Cisco ASR 903 Router
Table 17: Supported Hot Swapping Combinations
Interface Module
—
8-port Gigabit Ethernet SFP Interface
Module (8X1GE)
8-port Gigabit Ethernet RJ45 (Copper)
Interface Module (8X1GE)
SFP Combo IM—8-port Gigabit Ethernet
(8X1GE) +
1-port 10 Gigabit Ethernet (1X10GE)
Copper Combo IM—8-port Gigabit
Ethernet (8X1GE)
+ 1-port 10 Gigabit Ethernet Interface
Module(1X10GE
1-port 10 Gigabit Ethernet XFP Interface
Module (1X10GE)
2-port 10 Gigabit Ethernet Interface
Module(2X10GE)
8-port 10 Gigabit Ethernet Interface
Module (8X10GE)
1-port 100 Gigabit Ethernet Interface
Module (1X100GE)
2-port 40 Gigabit Ethernet QSFP Interface
Module (2X40GE)
48-port T1/E1 Interface Module
48-port T3/E3 Interface Module
1-port OC-192 Interface Module + 8-port
Low Rate Interface Module
A900-RSP1
Cisco IOS Release 3.14
1-port 10 Gigabit
Ethernet XFP Interface
Module (1X10GE)
No support
No support
8-port Gigabit Ethernet
SFP Interface Module
(8X1GE)
8-port Gigabit Ethernet
RJ45 (Copper) Interface
Module (8X1GE)
No support
No support
No support
No support
No support
No support
No support
Cisco ASR 903 and ASR 903U Aggregation Services Router Hardware Installation Guide
Swapping of Interface Modules
A900-RSP2A-64 and A900-RSP3C-400-S
A900-RSP2A-128
Cisco IOS Release Cisco IOS
3.13 Release 3.16
Swapping allowed No support
on all Ethernet
Interface Modules
No support
No support
No support
No support
No support
No support Swapping
allowed on all
Ethernet Interface
No support
Modules
No support
No support
No support
No support
95