Front Panel Indicators; Front Panel Leds In The Standby And Operate Modes - Compaq T2200 XR Operation And Reference Manual

Front Panel Indicators

The front panel LED display colors indicate the UPS status:
Green LEDs indicate normal conditions
Red LEDs provide warning of existing or potential problems
LEDs are referred to as LED 1 through 10 (LED 11 indicates that Configure
mode is ON and is only accessible during Configure mode when the front
bezel is removed), as described in this documentation.
When the UPS is in Configure mode, the LEDs do not operate as they do in
the Standby and Operate modes (see Chapter 4, "Configuration").
Front Panel LEDs in the
Standby and Operate Modes
Each LED (and the condition it indicates in the Operate and Standby modes) is
described in the following tables:
Load Level (LEDs 1 to 5)
LED
1
2
3
4
5
Table 3-1
Load Level – LEDs 1 to 5
Color Meaning
Red Load on the UPS exceeds the maximum power available.
Green Load on the UPS is approximately 76% to 100% of the
maximum power available.
Green Load on the UPS is approximately 51% to 75% of the maximum
power available.
Green Load on the UPS is approximately 26% to 50% of the maximum
power available.
Green Load on the UPS is approximately 0% to 25% of the maximum
power available.
Operation 3-5