ResMed VPAP VPAP Adapt SV System User Manual page 49

Guidance and Manufacturer's Declaration — Electromagnetic
Emissions and Immunity
Guidance and manufacturer's declaration – electromagnetic emissions
The VPAP Adapt SV is intended for use in the electromagnetic environment specified below. The
customer or the user of the VPAP Adapt SV should assure that it is used in such an environment.
Emissions test
RF emissions CISPR11
RF emissions CISPR 11
Harmonic Emissions
IEC 61000-3-2
Voltage Fluctuations/Flicker
Emissions IEC 61000-3-3
Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed
and put into service according to EMC information provided in this document.
Warnings: The VPAP Adapt SV should not be used adjacent to or stacked with other equipment.
If adjacent or stacked use is necessary, the VPAP Adapt SV should be observed to verify normal
operation in the configuration in which it will be used.
The use of accessories (eg Humidifiers) other than those specified in this manual is not
recommended. They may result in increased emissions or immunity of the VPAP Adapt SV.
Electromagnetic environment -
Compliance
guidance
Group 1 The VPAP Adapt SV uses RF energy
only for its internal function.
Therefore, its RF emissions are very
low and are not likely to cause any
interference in nearby electronic
equipment.
Class B The VPAP Adapt SV is suitable for use
in all establishments, including
Class A domestic establishments and those
directly connected to the public low-
voltage network that supplies
Complies buildings used for domestic purposes.
Technical Specifications 43