Using the S8 Auto 25
Setting up your S8
1
Connect the power cord to the socket at the rear of your S8 Auto 25.
2
Plug the other end of the power cord into the power outlet.
3
Connect one end of the air tubing firmly onto the air outlet.
4
Connect the assembled mask system to the free end of air tubing.
For information on assembling your mask, see your mask manual.
1
WARNING
!
•
Make sure the power cord and plug are in good condition and the
equipment is not damaged.
Only ResMed air tubing should be used with the device. A different type of
•
air tubing may alter the pressure you actually receive, reducing the
effectiveness of your treatment.
Blocking the hose and/or air inlet of the device while in operation could lead
•
to overheating of the device.
CAUTION
!
Be careful not to place the device where it can be bumped or where
•
someone is likely to trip over the power cord.
If you put the device on the floor, make sure the area is free from dust and
•
clear of bedding, clothes or other objects that could block the air inlet.
3
2
4
Using the S8 Auto 25
3