Table of Contents
Advertisement
The LCD displays a mask-fit star rating from zero to five stars. Three to five stars
indicates a good fit or better. Zero to two stars indicates that the mask needs to be
adjusted.
Reminders on the S8 LCD
Your clinician may have set your S8 Auto 25 to remind you about important events,
such as when to replace your mask, when to insert your Data Card and so on.
The reminder message is displayed on the LCD and is visible if the device is not
delivering therapy. The backlight on the LCD flashes when a message is displayed.
Your clinician can set any of the following reminders on your LCD:
Message
INSERT
CARD
REPLACE
MASK
CALL
PROVIDER
REPLACE
FILTER
SERVICE
DUE
Customised
messages
Smart Data™
Smart Data menus only appear if enabled by the clinician. Your clinician can set any
of the following Smart Data options:
Message
PRESSURE
MASK FIT
USAGE
AUTO APPEAR
8
Description
May appear if your device is
Data Card enabled.
Reminds you that your mask
is due for replacement.
Reminds you to contact your
clinician; for example to
discuss your therapy.
Reminds you to replace the
air filter on your device.
Reminds you to return your
device for service.
Your clinician may also set
reminders for other reasons;
for example to call a
particular person or number.
Description
Displays the therapy pressure from the previous session.
Displays the mask-fit star rating from the previous session.
Displays the usage hours from the previous session.
If ON is selected, Smart Data screens are automatically displayed
when you turn on your device.
Action
Insert your Data Card and follow any
instructions that your clinician has given you.
When you have done this, the message will
disappear from the LCD. Pressing
will also remove the message.
Press
(Ok) to remove the message
from your LCD and replace your mask with a
new one.
Press
(Ok) to remove the message
from your LCD and contact your clinician/
service provider.
Press
(Ok) to remove the message
from your LCD and replace the air filter.
Press
(Ok) to remove the message
from your LCD and contact your clinician/
service provider.
Press
(Ok) to remove the message
from your LCD and contact your clinician/
service provider.
(Ok)
Advertisement
Table of Contents
