Features; Delay Timer; Indications For Use - ResMed Sullivan Comfort Operating Manual

Resmed bi-level nasal system operating manual
Table of Contents

Advertisement

®
If you find the initial sensation of pressure uncomfortable while trying to fall
asleep you may use the delay timer. This allows you to select the time it will take
(5, 10 or 20 minutes) for the air pressure in your mask to build up gradually to
your prescribed pressures. You will have the comfort of relatively low pressures
while still awake and the assurance that the required pressures will be reached
shortly after you fall asleep. See section 5, Daily operation, for instructions on
use.
Note: Your physician may recommend that you do not use the delay timer, or use
it only to a limited degree. In this case your unit may be set accordingly.
Your Comfort is normally used at home, but it may also be taken with you when
you travel. The flow generator has a switch mode power supply which means it
can operate on power supplies in other countries without any special adjustment.
It can also be used in trucks and recreational vehicles. See section 7, Use in
different countries.
The SULLIVAN Comfort bi-level nasal system is for the treatment of obstructive
sleep apnea in adult patients.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents