Kohler KS530 Service Manual page 19

TOOLS
Description
Flywheel Puller
For properly removing fl ywheel from engine.
Flywheel Anchor Bolts, Washers, Nuts Tool
Used with Flywheel Puller to properly removing fl ywheel from 5400 Series engine.
Hose Removal Tool, Dual Size/End (also available in EFI Service Kit)
Used to properly remove fuel hose from engine components.
Hydraulic Valve Lifter Tool
For removing and installing hydraulic lifters.
Ignition System Tester
For testing output on all systems, including CD.
Inductive Tachometer (Digital)
For checking operating speed (RPM) of an engine.
Off set Wrench (K and M Series)
For removing and reinstalling cylinder barrel retaining nuts.
Oil Pressure Test Kit
For testing/verifying oil pressure on pressure lubricated engines.
Rectifi er-Regulator Tester (120 volt current)
Rectifi er-Regulator Tester (240 volt current)
For testing rectifi er-regulators.
Components of 25 761 20-S and 25 761 41-S
CS-PRO Regulator Test Harness
Special Regulator Test Harness with Diode
Spark Advance Module (SAM) Tester
For testing SAM (ASAM and DSAM) on engines with SMART-SPARK
Starter Servicing Kit (All Starters)
For removing and reinstalling drive retaining rings and brushes.
Individual component available:
Starter Brush Holding Tool (Solenoid Shift)
Stepper Motor Controller Tool
For testing operation of stepper motor/Digital Linear Actuator (DLA).
Jumper Lead Tool
For use with Stepper Motor Controller Tool to test rotary stepper motor.
Triad/OHC Timing Tool Set
For holding cam gears and crankshaft in timed position while installing timing belt.
Valve Guide Reamer (K and M Series)
For properly sizing valve guides after installation.
Valve Guide Reamer O.S. (Command Series)
For reaming worn valve guides to accept replacement oversize valves. Can be used
in low-speed drill press or with handle below for hand reaming.
Reamer Handle
For hand reaming using Kohler 25 455 12-S reamer.
22 690 01 Rev. --
.
™
KohlerEngines.com
Tools and Aids
Source/Part No.
SE Tools KLR-82408
Kohler 25 086 753-S
Kohler 25 455 20-S
Kohler 25 761 38-S
Kohler 25 455 01-S
Design Technology Inc.
DTI-110
Kohler 52 455 04-S
Kohler 25 761 06-S
Kohler 25 761 20-S
Kohler 25 761 41-S
Design Technology Inc.
DTI-031R
DTI-033R
Kohler 25 761 40-S
SE Tools KLR-82411
SE Tools KLR-82416
Kohler 25 455 21-S
Kohler 25 518 43-S
Kohler 28 761 01-S
Design Technology Inc.
DTI-K828
Kohler 25 455 12-S
Design Technology Inc.
DTI-K830
19