Install Cam Levers; Install Oil Pump And Oil Pump Housing Assembly; Install Crankshaft And Crankshaft Gear - Kohler KS530 Service Manual

Install Cam Levers

B
B
A Cam Lever Screw
B
NOTE: Do not reinstall a cam lever screw that has been
removed. Discard removed screw and install
new screw with Loctite
Install cam levers on screw and secure to crankcase.
Torque screw to 12.5 N·m (110 in. lb.).

Install Oil Pump and Oil Pump Housing Assembly

C
A Oil Pump Housing Assembly
B Oil Pump Assembly
C Oil Pump Housing Screws
1. Lightly grease gerotor gears and set them into
crankcase.
2. Install oil pump housing and secure to crankcase
with screws; torque screws to 4.8 N·m (42 in. lb.).
22 690 01 Rev. --
A
Cam Levers
Dri-Loc patch.
® ®
A
B
KohlerEngines.com
3. Install camshaft into oil pump housing; turn to drop
into place. Turn camshaft to align timing mark to
center of crankshaft PTO bore.
4. Lift camshaft out.

Install Crankshaft and Crankshaft Gear

A Crankshaft Gear
B
C
1. Carefully install crank gear key in keyway and slide
crankshaft gear on crankshaft.
2. Carefully install crankshaft into crankcase, through
PTO seal, and seat fully into place.
Reassembly
A
B
C
Crankshaft
Key
77