Table of Contents
Advertisement
9V~36V DC
POWER INPUT
Connecting an Adapter to the Power Jack
The monitor can be powered through the lockable 9-36 V DC jack. You must use an adapter
with a locking connector that meets the requirements in the device specifications.
Mounting the Monitor
The NI TSM-101x monitor can be mounted in a panel, cabinet, rack, wall, or on a monitor arm
or stand.
Installation requires a Phillips screwdriver and may require additional accessories.
Caution
Dimensions
The following figures show the dimensions for the three models of NI TSM-101x.
Figure 3. Wiring the Three-Pin Power Connector
GND
When mounting, do not overtighten the retention screws.
9V~36V
NI TSM-101x User Manual | © National Instruments | 7
CONNECT TO
EARTH GROUND
Hide quick links:
Advertisement
Table of Contents
