Table of Contents
Advertisement
4.
Use a Phillips screwdriver to tighten the screws that pass through the panel mounting
clamps until the plastic caps at the front of the screws are firmly secured to the panel.
Cabinet or Rack Mounting
The back of the metal frame around the monitor has retention screw holes for a cabinet or rack
installation bracket. Take the following steps to mount the NI TSM-101x monitor into a
cabinet or rack.
1.
Slide the monitor through the cabinet or rack bracket until the rear side of the monitor
frame is flush against the front of the bracket.
2.
Secure the panel mounting bracket to the rear of the monitor. Insert the panel mounting
clamps into the holes along the edges of the monitor, as shown in the following figure.
3.
Use a Phillips screwdriver to tighten the screws that pass through the panel mounting
clamps. Secure the plastic caps at the front of the screws to the panel.
4.
Slide the monitor with the attached bracket into a rack or cabinet.
5.
Insert and tighten the retention screws to secure the system into a cabinet or rack as
shown in the following figure.
Figure 7. Panel Mounting Clamp Positions
NI TSM-101x User Manual | © National Instruments | 11
Hide quick links:
Advertisement
Table of Contents
