Mounting to a Monitor Stand
The NI TSM-101x monitor has standard Video Electronics Standards Association (VESA)
mounting holes in the rear panel. The holes are designed for M4 screws and set at 100.0 mm ×
100.0 mm (3.94 in. × 3.94 in.) apart.
The monitor stand mounting plate has a matching VESA hole pattern. Take the following steps
to mount the NI TSM-101x monitor onto a stand.
1.
Align the threaded holes on the monitor rear panel with the screw holes on the monitor
stand mounting plate.
2.
Secure the monitor to the stand with the supplied retention screws.
Mounting to a Monitor Arm
The NI TSM-101x monitor has standard Video Electronics Standards Association (VESA)
mounting holes in the rear panel. The holes are designed for M4 screws and set at 100.0 mm ×
100.0 mm (3.94 in. × 3.94 in.) apart.
The monitor arm mounting plate has a matching VESA hole pattern. Take the following steps
to mount the monitor to a monitor arm:
1.
Align the threaded holes on the monitor rear panel with the screw holes on the monitor
arm mounting plate.
2.
Secure the monitor to the arm with the supplied retention screws.
12 | ni.com | NI TSM-101x User Manual
Figure 8. Securing the Cabinet or Rack Bracket