3Com 5500G Configuration And Command Reference Manual page 19

Switch open services networking

Hide thumbs Also See for 5500G:

Table of Contents

ACFP Configuration Example 19

in network segment 192.168.2.0 (achieved by setting node

h3cAcfpRuleSrcIP) and source IP wildcard-mask is 0.0.0.255 (achieved by

setting node h3cAcfpRuleSrcIPMask) are matched, the rule row status is 4

(achieved by setting node h3cAcfpRuleRowStatus) and the other

parameters adopt the default values.

# Apply ACFP rules

Configure the ACFP policy through the MIB browser, where the policy

index is 1.1. Configure the Admin-Status as enable (achieved by setting

node h3cAcfpPolicyAdminStatus).

Verify the configuration.

■

Use the ping command to verify the connectivity between Host A and

Host C, Host B and Host C. The test results show that Host C can be

pinged through on Host A and Host C cannot be pinged through on Host

Table of Contents

Chapters

Table of Contents