17.8.4 Handset Volume
While talking via the handset, you can adjust the volume of the caller.
1. With the phone idle or ringing, use the
2. Once you stop adjusting the volume, the display returns to normal after a few seconds.
·
If you set the volume to zero (off), the phone displays a
17.8.5 Headset Volume
While talking via the headset, you can adjust the volume of the caller.
1. With the phone idle or ringing, use the
2. Once you stop adjusting the volume, the display returns to normal after a few seconds.
·
If you set the volume to zero (off), the phone displays a
17.8.6 Speaker Volume
While talking via the speaker, you can adjust the volume of the caller.
1. With the phone idle or ringing, use the
2. Once you stop adjusting the volume, the display returns to normal after a few seconds.
·
If you set the volume to zero (off), the phone displays a
17.8.7 Automatic Gain Control
When using automatic gain control (AGC), the phone tries to maintain a constant audio level even if the incoming call
changes between loud and quiet.
1. Press the
button.
2. Use the up and down cursor keys to highlight Options & Settings. Press Select.
3. Use the up and down cursor keys to highlight Screen & Sound. Press Select.
2. Use the up and down cursor keys to highlight Automatic Gain Control. Press Select.
·
Use the up and down cursor keys to switch between Handset, Headset, or Speaker settings for AGC.
·
To change the highlighted setting, press Change.
4. When completed, press Save.
5. Press Back / Exit to exit the menus.
17.8.8 Default Handsfree Audio Path
By default, when you make a call or answer a call without lifting the handset, the audio is played through the phone's
speaker while you speak via the phone's microphone.
If you have a headset attached, you can change the phone's behavior so that the audio is played through the headset by
default rather than the speaker.
1. Press the
button.
2. Use the up and down cursor keys to highlight Call Settings.
3. Press Select.
4. Use the up and down cursor keys to highlight Audio Path.
5. Press Change to change the setting between Headset and Speaker.
6. When completed, press the Save soft key.
7. Press the Back / Exit soft keys to exit the menus.
9500 Series Telephone User Guide
IP Office™ Platform 11.0
+
–
plus and
minus keys to adjust the volume.
+
–
plus and
minus keys to adjust the volume.
+
–
plus and
minus keys to adjust the volume.
Comments on this document? infodev@avaya.com
Phone Settings: Volume and Sound
icon.
icon.
icon.
Issue 12b (Wednesday, March 28, 2018)
Page 131