Configuration As A Collective Detector Line (Gmt); Detectors Which Can Be Connected - Siemens FDCIO223 Technical Manual

Structure and function
3.4.1

Configuration as a collective detector line (GMT)

3.4.1.1

Detectors which can be connected

28
Building Technologies
Fire Safety
Different generations of detector can be connected to the input/output module, e.g.:
Collective detector line configured as Siemens/Cerberus:

‒ MS6; only detectors with LED alarm indicator (not incandescent lamps)
‒ MS7
‒ MS9
‒ SIGMACON (SIGMASYS GMT)
‒ AlgoRex DS110x
Special detectors on the collective detector line, configured as

Siemens/Cerberus:
‒ Flame detector S2406, DF119x, FDF2x19
‒ Linear detector A2400, DLO1191, FDL2x19
‒ Neural fire detector FDOOT2419
‒ Intrinsically safe ex detector DS110x-Ex, DF1101-Ex, F911
‒ Titanus ProSens smoke extraction system (only with new resetting board
type E548/c)
Collective detector line configured as SynoLINE300:

‒ Synova300
‒ Third-party products in accordance with 'Industrial conventional'
(Synova300C)
It is not possible to operate Siemens/Cerberus detectors and SynoLINE300
detectors simultaneously on the same detector line. The compatible detector
types are listed in the 'Collective compatibility' chapter and in the 'List of
compatibility'.
See also
 Collective compatibility [ 63]
009122_e1_en_--
2015-10-06