OPERATION
3.
Recoil Starter
Pull recoil starter handle (D)
and engine should start.
Note: If engine does not start
after 5 pulls, use Cold
Start Procedure.
Stopping Engine
1.
Throttle Position Lever
Move throttle position lever
(A) to START/IDLE (
position and allow engine to
return to idle before shutting
off engine.
2.
Stop Switch
Move throttle lever (A) to STOP (
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your dealer repair stop switch before using unit again.
Operating Blower
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a
poison gas. Breathing CO can cause unconsciousness, serious
injury, or death. Exhaust can cause serious burns. ALWAYS
position unit so that exhaust is directed away from your face
and body.
24
)
) position.
PB-265LN
D
A
X7501186202
© 3/2018 ECHO Inc.