MAINTENANCE
2.
Place piston at top dead
center. Remove muffler (A)
and heat shield (B).
3.
Use a wood or plastic
scraping tool to clean
deposits from cylinder
exhaust port.
Never use a metal tool to scrape carbon from the exhaust port. Do
not scratch the cylinder or piston when cleaning the exhaust port. Do
not allow carbon particles to enter the cylinder.
4.
Inspect heat shield, and
replace if damaged.
5.
Install heat shield and
muffler.
6.
Tighten muffler mounting
bolts (or nuts) to 70-80
kgf•cm (60-70 in•lbf).
7.
Install engine cover and
attach spark plug lead.
8.
Start engine, and warm to
operating temperature.
9.
Stop engine, and re-
tighten mounting bolts (or
nuts) to specifications.
Carburetor Adjustment
Engine Break-In
New engines must be operated a minimum duration of two tanks of fuel
break-in before carburetor adjustments can be made. During the break-in
period your engine performance will increase and exhaust emissions will
stabilize. Idle speed can be adjusted as required.
32
PB-265LN
B
X7501186202
© 3/2018 ECHO Inc.
A