Deleting Data - Siemens RX1400 Reference Manual

Chapter 5
Changing Configuration Data
<target>
<candidate/>
</target>
</unlock>
</rpc>]]>]]>
8. Unlock the target configuration:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="236">
<unlock>
<target>
<running/>
</target>
</unlock>
</rpc>]]>]]>
Section 5.2.4

Deleting Data

To delete a specific configuration setting, do the following:
1. Connect to and log in to the device.
2. Lock the running configuration:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="230">
<lock>
<target>
<running/>
</target>
</lock>
</rpc>]]>]]>
3. Lock the target configuration:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="231">
<lock>
<target>
<candidate/>
</target>
</lock>
</rpc>]]>]]>
4. Discard any configuration changes:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="232">
<discard-changes/>
</rpc>]]>]]>
5. Issue an <rpc> request with the delete operation:
<rpc message-id="233" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
<target>
<candidate/>
</target>
<config>
<{root element}
xmlns="{namespace URL}"
xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
{configuration data with nc:operation="delete" attribute}
</{root element}>
</config>
48
RUGGEDCOM NETCONF
Reference Guide
Deleting Data