Siemens RX1400 Reference Manual page 57

RUGGEDCOM NETCONF
Reference Guide
</source>
</copy-config>
</rpc>]]>]]>
The file is saved to the /var/lib/config directory on the device.
To overwrite a configuration with a configuration file, do the following:
1. Upload an XML configuration file to the device. For instructions on how to upload a configuration file, refer
to the RUGGEDCOM NETCONF v Web Interface User Guide or RUGGEDCOM NETCONF v CLI User Guide for the
device.
2. Connect to and log in to the device.
3. Lock the running configuration:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="230">
<lock>
<target>
<running/>
</target>
</lock>
</rpc>]]>]]>
4. Lock the target configuration:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="231">
<lock>
<target>
<candidate/>
</target>
</lock>
</rpc>]]>]]>
5. Discard any configuration changes:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="232">
<discard-changes/>
</rpc>]]>]]>
6. Use copy-config to copy the file to a specified configuration:
<rpc message-id="233" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<copy-config>
<target>
<{configuration}/>
</target>
<source>
<url>file:///{filename}</url>
</source>
</copy-config>
</rpc>]]>]]>
• {configuration}
The target configuration: can be candidate or running.
• {filename}
The name of the configuration file uploaded to /var/lib/config
For example, this command loads the configuration file standard_config.xml to the running
configuration:
<rpc message-id="233" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<copy-config>
<target>
Copying Data
Chapter 5
Changing Configuration Data
45