2 . Click Save .
DISABLE DISK MISSING ALARM
Disable this alarm for any HDDs that are not present .
1 . Login to the NVR system .
2 . Select Disk Manager. The Storage Management side tab screen should display the physical
drives connected to the system .
3 . Each installed HDD will have information populated along its row . If a row is not populated with
a HDD, uncheck the box in the Missing alarm column to disable this alarm for this uninstalled
HDD .
4 . Repeat this procedure for every installed HDD .
5 . Click Save in the bottom left corner .
14
ProSeries NVR Installation Guide Only 03162018.indd 14-15
NETWORK CONNECTION SCHEMATIC DIAGRAM
Although it is not required, at this point in the installation you may run cables and
install the cameras .
15
3/26/2018 10:32:35 AM