Recording Schedule Setup; Basic Schedule Setup; Motion Detection Only Recording Setup - Uniden Pro12800N0-4K Installation Manual

2 . Click Add User on the bottom right side of the screen . The Add User screen displays .
3 . Enter the information for a new user (a popup keyboard displays) and select the Return button
to save the information ( ) .
4 . The new user displays on the User List .

RECORDING SCHEDULE SETUP

The default recording schedule is for all cameras to record all the time . Set up a recording
schedule .
20
ProSeries NVR Installation Guide Only 03162018.indd 20-21

Basic Schedule Setup

1 . Select Channel Setting/Planning/Recording Setting . The default recording schedule displays all
channels recording all the time .
2 . Select Setting . The Arming Schedule popup screen displays .
3 . Select the day of the week to set, then set up to 8 segments for recording in military time (24-
hour) format (00:00 - 23:59). Copy the scheduled recording time to all days or to specific days.
Select OK . The Recording Setting screen displays again with the new recording schedule .
4 . If you have an IP camera with an SD card, check Enable ANR (Automatic Network Restoration)
to buffer recording from the SD card .

Motion Detection Only Recording Setup

1 . From Channel Setting/Planning, select Alarm Recording for Record Mode .If you want the
system to save any seconds before or after the recording time, select the number of seconds to
save through Pre Record and Post Record .
21
3/26/2018 10:32:40 AM