Table of Contents
Advertisement
RECORDING SCHEDULE SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Basic Schedule Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Motion Detection Only Recording Setup . . . . . . . . . . . . . . . . . . . . . . . .21
SET UP ALARM INPUTS/OUTPUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Alarm Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Alarm Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
SET UP EMAIL NOTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
SET UP REMOTE DDNS ACCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
CHECK FIRMWARE VERSION; UPDATE IF NEEDED . . . . . . . . . . . . . . .25
HARD DISK DRIVE SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
UNCHECK MISSING ALARM FOR ALL UNINSTALLED HDDS . . . . . . . .25
ADDING HDDS/RAID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Install the Hard Disk Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Enabling the RAID (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Setting up the RAID if Enabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Formatting the HDDs/RAID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
CAMERA SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
SET UP IP ADDRESSES - 1 LAN PORT ONLY . . . . . . . . . . . . . . . . . . . . .28
SET UP IP ADDRESSES - 2 LAN PORTS . . . . . . . . . . . . . . . . . . . . . . . . .29
SET UP IP CAMERAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
PLANNING IP ADDRESSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
ADDING IP CAMERAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
PREREQUISITES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
SET UP CHANNEL GROUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Name Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Create a Preview Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Assign Channels to the Preview Group . . . . . . . . . . . . . . . . . . . . . . . . .31
SET UP CAMERA TOURS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
SET UP PTZ CAMERA(S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Configure PTZ Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Adjust PTZ Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Set Up PTZ Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Set Up PTZ Cruise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Set Up PTZ Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Set Camera Settings for each Channel . . . . . . . . . . . . . . . . . . . . . . . . .35
ProSeries NVR Installation Guide Only 03162018.indd 4-5
UNIDEN PROSERIES NVR INSTALLATION GUIDE
OVERVIEW
This Installation Guide helps the installer to install and initially configure Uniden's ProSeries series
NVR surveillance systems . It provides basic instructions to install the NVR receiver; it does not
provide detailed instructions on how to use the firmware. For detailed firmware operation, refer to
the online ProSeries NVR User's Manual at www.uniden.com. A series of informational articles can
also be found at https://unidenamerica .desk .com/?b_id=17003 .
This Installation Guide uses ProSeries NVR models (version 2 .0) with an operating interface of
NVR 64 channels as a generic example for intallation procedures . Details vary according to the
specific model being installed.
PROSERIES NVR INSTALLATION GUIDE ATTRIBUTES
This Guide provides a decription of the various Uniden ProSeries NVR models' hardware. It also
provides a basic installation checklist with accompanying procedures for each step .
The Installation Guide text confirms to the following nomenclature:
• Italic text indicates a screen name, menu selection, etc . It is usually prefaced with "Select ."
• BOLD text indicates an action, such as Save, Copy to, etc . It is usually prefaced with "Click ."
REQUIREMENTS
• Access to standard AC outlet (AC100~240V, 50Hz~60Hz)
• Phillips-head screwdriver may be required
• HDMI 1080p monitor (for initial boot up)
• External PoE network switch to add more than 8 cameras (ProSeries series 16 ~ 128 channel
NVRs)
• Camera network cables if devices purchased separately (only included in Pro Series kits)
• Optional 12VDC power supply (if PoE not used)
• HDMI or VGA cable (HDMI cable included in Pro Series kits)
• Western Digital Purple or Seagate SkyHawk surveillance hard drives (for systems containing
more than 8 cameras)
FIRMWARE AND DOCUMENTATION UPDATES
Because Uniden strives to provide the latest technology and quality in all of its products, firmware
updates may be available with no prior notice . Check for updates at support .uniden .com/pro-
support. Update the firmware manually either locally or remotely through a web browser.
5
3/26/2018 10:32:29 AM
Advertisement
Table of Contents
