Hach HQ11d User Manual page 31

Figure 13 Basic report for sample data—1 line
1 Data type (RD=reading)
2 Parameter (pH, LDO, etc.)
3 Time (hh:mm:ss in 24 h or user-defined format)
4 Date (DD-MM-YY or user-defined format)
5 Measured value
Figure 14 Advanced report for sample data—2 lines
1 Probe model
2 Error message (if applicable)
3 Probe serial number (a "<" or ">" on the HQ40d meter indicates the probe
position)
6 Units
7 Sample ID: user-defined; shows "SAMPLE ID" if undefined
8 Sample ID counter
9 Operator ID: user-defined; shows "- - -" if undefined
4 Additional units: shows all additional units associated with the reading.
5 Probe settings: shows the highest-priority setting associated with the reading
English 29