Table of Contents
Advertisement
Figure 6 Single screen display
1 Calibration status indicator
2 Main measurement value and unit
3 IntelliCAL probe type and port
indicator
4 Battery status
5 Power source
6 Sample temperature (ºC or ºF)
7 Secondary measurement unit
8 Tertiary units (for some probes)
Big-screen mode
The font size of the sample reading can be increased or decreased with
the
key
(Figure
7).
Note:
When two probes are connected, push and hold the key to select the
big-screen mode. The big-screen mode can also be selected in the Display Options
menu (Refer to
Set the display options
10 English
9 Time
10 Date
11 Read (OK, Select)
12 Display size icon
13 Calibrate (Cancel, Exit)
14 Sample and operator identification
15 Stability or display lock indicator
on page 20).
Figure 7 Single-screen display—big-screen mode
1 Calibration status indicator
2 IntelliCAL probe type and port
indicator
3 Power source or battery status
4 Main measurement value
Dual-screen mode (HQ40d model only)
When two probes are connected to the HQ40d meter, the display can
show the reading from both probes simultaneously or show just one
probe
(Figure
8).
Note: For probe calibration, change the screen mode to the single screen mode.
To change the screen mode to single or dual screen, use the
keys. In dual screen mode, the
left and the
key will select the probe on the right.
5 Main measurement unit
6 Display size icon
7 Sample temperature (ºC or ºF)
8 Stability or display lock indicator
and
key will select the probe on the
Hide quick links:
Advertisement
Table of Contents
