Troubleshooting - Nautilus T616 Assembly Manual / Owner's Manual

TROUBLESHOOTING

Condition/Problem
No display/partial display/
unit will not turn on
Unit operates but Contact
HR not displayed
Unit operates but
Telemetric HR not
displayed
Speed display is not
accurate
52
Things to Check
Check electrical (wall)
outlet
Check connection at front
of unit
Check data cable integrity
Check data cable
connections/orientation
Check console display for
damage
Console Display
Sensor grip
Dry or calloused hands
Chest Strap
Chest Strap Batteries
Check User Profile
Interference
Replace Chest Strap
Replace Console
Display set to wrong unit
of measure. (English/
Metric)
Make sure unit is plugged into a functioning wall outlet. Test the
outlet with a known functioning device such as a lamp.
Connection should be secure and undamaged. Replace power
cord or connection at unit if either are damaged.
All wires in cable should be intact. If any are visibly crimped or
cut, replace cable.
Be sure cable is connected securely and oriented properly.
Small latch on connector should line up and snap into place.
Check for visual sign that console display is cracked or other-
wise damaged. Replace Console if damaged.
If Console only has partial display and all connections are fine,
replace the Console.
If the above steps do not resolve the problem, contact Cus-
tomer Care for further assistance.
Be sure hands are centered on HR sensors. Hands must be
kept still with relatively equal pressure applied to each side.
Sensors may have difficulty with dried out or calloused hands.
A conductive electrode cream (heart rate cream) can help
make better conduct. These are available on the web or at
medical or some larger fitness stores.
If tests reveal no other issues, contact Customer Care for fur-
ther assistance.
Strap should be "POLAR " compatible and uncoded. Make
®
sure strap is directly against skin and contact area is wet. Make
sure the transmitter has the curve oriented upward.
If strap has replaceable batteries, install new batteries.
Select the Edit User Profile option for the User Profile. Go to
the WIRELESS HR setting and make sure that the current
value is set to ON.
Try moving unit away from sources of interference (TV, Micro-
wave, etc).
If interference is eliminated and HR does not function, replace
strap.
If HR still does not function, contact Customer Care for further
assistance.
Change display to show correct units.
Solution