Dimension drawings
6.2 D445-2 DP/PN and D455-2 DP/PN dimension drawing
6.2
D445-2 DP/PN and D455-2 DP/PN dimension drawing
Figure 6-2
SIMOTION D445‑2 DP/PN and D455-2 DP/PN must always be operated with a double fan /
battery module.
NOTICE
Higher operating temperature if ventilation clearances are too small
The 80 mm clearances above and below the components must be observed.
The unit protects itself from overheating by shutting down.
The ventilation clearance is measured from the lower edge of the module, i.e. the fan/battery
module is not included in the dimension.
92
D445-2 DP/PN and D455-2 DP/PN dimension drawing
SIMOTION D4x5-2
Manual, 04/2014