Ryobi EMS2305SCL Owner's Operating Manual

Ryobi EMS2305SCL Owner's Operating Manual

2000 watt 305 mm slide compound mitre saw with laser

Advertisement

EMS2305SCL MANUAL
29/4/05
OWNER'S OPERATING MANUAL
2000 WATT 305 MM SLIDE COMPOUND

SPECIFICATIONS:

Power Input
No Load Speed
Blade Diameter
Blade Arbor
Weight

Cutting Capacity

Mitre
Bevel
90°
90°
45°L/ 45°R
45°
45°L/ 45°R
90°
90°
45°
THANK YOU FOR BUYING A RYOBI 305mm SLIDE COMPOUND MITRE SAW
Your new mitre saw has been engineered and manufactured to Ryobi's high standard for
dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged,
trouble free performance.
CAUTION: Carefully read through this entire owner's manual before using your
SLIDE COMPOUND MITRE SAW.
THANK YOU FOR BUYING A RYOBI 305mm SLIDE COMPOUND MITRE SAW
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions.
If you use your saw properly and only for what it is intended, you will enjoy years of safe,
reliable service.Thank You again for buying Ryobi tools.
1:54 PM
Page 1
MITRE SAW WITH LASER
MODEL EMS2305SCL
2000W
4200 min -1
305mm
16mm
23kg
Max. Width of Cut
315mm
220mm
220mm
315mm
SAVE THIS MANUAL FOR FUTURE REFERENCE.
N197
Max. Depth of Cut
110mm
75mm
110mm
57mm

Advertisement

Table of Contents
loading

Summary of Contents for Ryobi EMS2305SCL

  • Page 1 THANK YOU FOR BUYING A RYOBI 305mm SLIDE COMPOUND MITRE SAW Your new mitre saw has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble free performance.
  • Page 2: Rules For Safe Operation

    EMS2305SCL MANUAL 29/4/05 1:54 PM Page 2 RULES FOR SAFE OPERATION 9. DRESS PROPERLY. Do not wear loose clothing or The purpose of safety rules is to attract your attention to jewellery. They can be caught in moving parts. Rubber possible dangers.
  • Page 3 • Do not change the laser light assembly with a different type. that are defective or incorrect. The maximum blade ca- Repairs must be carried out by authorized Ryobi service pacity of your saw is 305mm. centre. AVOID CUTTING NAILS. Inspect and remove all nails from timber before cutting.
  • Page 4 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 4 FEATURES 18. Blade guard release lever 1. Dust collection bag 2. Sliding rail lock 17. On/off trigger 16. Motor 3. Saw head lock 4. Angle lock 15. Blade guard 5. Workpiece clamp 9. Laser 7.
  • Page 5 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 5 ASSEMBLY FITTING THE BLADE GUARD. WARNING : Failure to unplug your saw could result in accidental starting causing possible serious personal injury. Fig. 1 cover plate screw Fig. 2 guard screw • Unplug the saw from the outlet. Ensure the cutting head is up to its full extent.
  • Page 6 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 6...
  • Page 7 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 7 ADJUSTMENTS WARNING : Failure to unplug your saw could result in accidental starting causing pos- sible serious personal injury. AJUSTMENT OF THE CUTTING ANGLES. The saw is factory set and should need little or no adjustment when new, however both time and use can affect the angles and some adjustment may be required during the life of the saw.
  • Page 8 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 8 FITTING THE REPEAT STOP. • Loosen the thumb screw to allow the arms of the work piece supports into the holes in the repeat stops. • Tighten the thumb screws firmly to minimise movement on the work piece support.
  • Page 9 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 9 DEPTH STOP: (Fig.9) Use of the depth stop feature means that the blade will not cut completely through the work piece depending on the depth that it is set to. This allows the operator to cut slots out of the work piece if used in conjunction with the sliding function of the saw.
  • Page 10 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 10...
  • Page 11 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 11...
  • Page 12 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 12...
  • Page 13 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 13 Fig.10 Fig.32 Fig.11 Fig.33...
  • Page 14 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 14 OPERATION...
  • Page 15 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 15 OPERATION Fig.12 Fig.31...
  • Page 16 EMS2305SCL MANUAL 29/4/05 1:54 PM Page 16...
  • Page 17 RYOBI NEW ZEALAND PTY. LTD. AUCKLAND: 503 Mt Wellington Highway, Mt Wellington, N.Z. Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - www.ryobi.co.nz Contact during normal business hours. This Guarantee Form Should Be Retained By The Customer At All Times For your record and to assist in establishing date of purchase (necessary for in-guarantee service) please keep your purchase docket and this form completed with the following particulars.

Table of Contents