Page 14
ADJUSTMENTS Your compound mitre saw has been adjusted Check if the blade guard operates correctly before at the factory for making very accurate cuts. connecting the saw to the power supply. However, some of the components might have been jarred out of alignment during shipping. Also, WARNING: If the inner blade washer has over a period of time, re-adjustment will probably...
Page 15
ADJUSTMENT Unlock the bevel lock lever(16) and move the saw DEPTH OF CUT ADJUSTMENT(Fig. 24&25) arm to the 0 position and lock the bevel lock lever. Unplug the power cord. (Fig.16) The saw blade can cut deeper by turning the depth Lay the combination square(b) on the mitre cut adjustment screw(26) counterclockwise and table(11) and against the blade(a).
Page 20
RYOBI NEW ZEALAND PTY. LTD. AUCKLAND: 27 Clemow Drive, Mt Wellington, N.Z. Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - www.ryobi.co.nz Contact during normal business hours. This Guarantee Form Should Be Retained By The Customer At All Times For your record and to assist in establishing date of purchase (necessary for in-guarantee service) please keep your purchase docket and this form completed with the following particulars.