Adjusting The Brightness; Vignette - FujiFilm Instax SQUARE SQ10 User Manual

Image Eff ects

Adjusting the Brightness

EN
Follow the steps below to adjust the brightness.
~
Press the (Brightness) button while shooting/
playback screen is displayed.
The screen below appears.
Ÿ
Use the command dial to adjust the brightness.
Turn the command dial clockwise to brighten the
image, and turn the dial counterclockwise to darken
it.
!
Press the (Brightness) button again.
The adjusted brightness is applied to the image and
returns to the previous screen.
• You can also return to the previous screen by
pressing the MENU/OK button or
button.
• To cancel the adjusted brightness, press and hold the
(Brightness) button.
Notes on image effects:
• Each adjusted value or effect remains after you take a picture. However, it will be disabled when you view the image on a
device (e.g. computer) other than this camera.
• You can apply multiple effects to one image.
• Press and hold the (Back) button to cancel all adjusted values or effects.
• Depending on the subject or camera settings, images may (in some cases) be grainy or vary in brightness and hue.
18
instax_D-SQ_6lang.indb 18 instax_D-SQ_6lang.indb 18

Vignette

Adjust the brightness of four corners on the image. Follow
the steps below to adjust the brightness.
~
Press the
playback screen is displayed.
The screen below appears.
Ÿ
Use the command dial to adjust the brightness of
the four corners.
Turn the command dial clockwise to darken the
corners, and turn the dial counterclockwise to
brighten them.
!
Press the
The adjusted brightness is applied to the image and
returns to the previous screen.
(back)
• You can also return to the previous screen by
pressing the MENU/OK button or
button.
• To cancel the adjusted brightness, press and hold the
(Vignette) button.
(Vignette) button while shooting/
(Vignette) button again.
(back)
2017/2/20 14:12:11 2017/2/20 14:12:11