Table of Contents
Advertisement
R
Analog Capture Circuit
The Spartan-3E Starter Kit board includes a two-channel analog capture circuit, consisting
of a programmable scaling pre-amplifier and an analog-to-digital converter (ADC), as
shown in
The analog capture circuit consists of a Linear Technology LTC6912-1 programmable pre-
amplifier that scales the incoming analog signal on header J7 (see
of pre-amplifier connects to a Linear Technology LTC1407A-1 ADC. Both the pre-amplifier
and the ADC are serially programmed or controlled by the FPGA.
Spartan-3E Starter Kit Board User Guide
UG230 (v1.0) March 9, 2006
Figure
10-1. Analog inputs are supplied on the J7 header.
6-pin ADC Header (J7)
Figure 10-1: Two-Channel Analog Capture Circuit
www.xilinx.com
Linear Tech LTC1407A-1 Dual A/D
SPI_SCK: (U16)
AD_CONV: (P11)
SPI_MISO: (N10)
Linear Tech LTC6912-1 Dual Amp
SPI_MOSI: (T4)
AMP_CS: (N7)
SPI_SCK: (U16)
AMP_SHDN: (P7)
AMP_DOUT: (E18)
Chapter 10
UG230_c10_01_030306
Figure
10-2). The output
73
Advertisement
Table of Contents
