Departing On A Circular Path With Tangential Connection: Dep Ct; Departing On A Circular Arc Tangentially Connecting The Contour And A Straight Line: Dep Lct - HEIDENHAIN TNC 620 User Manual

Departing on a circular path with tangential
connection: DEP CT
The tool moves on a circular arc from the last contour point P
the end point P . The circular arc connects tangentially to the last
N
contour element.
Program the last contour element with the end point P
radius compensation
Initiate the dialog with the APPR/DEP key and DEP CT soft key:
Center angle CCA of the arc
Radius R of the circular arc
If the tool should depart the workpiece in the
direction opposite to the radius compensation:
Enter R as a positive value.
If the tool should depart the workpiece in the
direction
Enter R as a negative value.
Example NC blocks
23 L Y+20 RR F100
24 DEP CT CCA 180 R+8 F100
25 L Z+100 FMAX M2
Departing on a circular arc tangentially connecting the
contour and a straight line: DEP LCT
The tool moves on a circular arc from the last contour point P
to an auxiliary point P . It then moves on a straight line to the
H
end point P . The arc is tangentially connected both to the last
N
contour element and to the line from P
are known, the radius R suffices to unambiguously define the tool
path.
Program the last contour element with the end point P
radius compensation
Initiate the dialog with the APPR/DEP key and DEP LCT soft key:
Enter the coordinates of the end point P
Radius R of the circular arc. Enter R as a positive
value
Example NC blocks
23 L Y+20 RR F100
24 DEP LCT X+10 Y+12 R+8 F100
25 L Z+100 FMAX M2
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014
Approaching and departing a contour
to the radius compensation:
opposite
to P . Once these lines
H N
to
E
and
E
Last contour element: PE with radius compensation
Center angle=180°,
arc radius=8 mm
Retract in Z, return to block 1, end program
E
and
E
N
Last contour element: PE with radius compensation
Coordinates PN, arc radius=8 mm
Retract in Z, return to block 1, end program
6
6.3
199