Tool Movements; Path Functions; Fk Free Contour Programming (Advanced Programming Features Software Option); Miscellaneous Functions M - HEIDENHAIN TNC 620 User Manual

6
Programming: Programming contours
6.1

Tool movements

6.1 Tool movements

Path functions

A workpiece contour is usually composed of several contour
elements such as straight lines and circular arcs. With the path
functions, you can program the tool movements for
and
circular arcs.
FK free contour programming (Advanced
programming features software option)
If a production drawing is not dimensioned for NC and the
dimensions given are not sufficient for creating a part program,
you can program the workpiece contour with the FK free contour
programming. The TNC calculates the missing data.
With FK programming, you also program tool movements for
straight lines and

Miscellaneous functions M

With the TNC's miscellaneous functions you can affect
the program run, e.g., a program interruption
the machine functions, such as switching spindle rotation and
coolant supply on and off
the path behavior of the tool
186
circular arcs.
straight lines
HEIDENHAIN Conversational Programming | 3/2014
TNC 620 | User's Manual