Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X11SSN-H/-E/-L User Manual

X11SSN-H/-E/-L User's Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)

Tools Needed

FAN1
JHDMI1
JPW2
JPF1
JLCDPWR1

Location of Mounting Holes

Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lbf/in on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precaution-
ary measures to avoid damaging these components when installing the motherboard
to the chassis.
Phillips Screws (4)
B2 B11
A12 A1
USB6(3.0)
DP
SRW1
SRW3
JCOM2:
COM3
JCOM1:
COM1 COM2
24
Standoffs (4)
Only if Needed
A4 A1
A9
A5
B1
B1
B9
B5
USB4/5(3.0)
B2
B11
LAN2
SRW2
PWR ON
JF1
HDD
PWR
SRW4
COM4
I-SATA1
JPH1
JD1
JF1
A14
LAN1
JGP1
RST
LED
LED
J2
J3
AUDIO FP
J4
BT1