Boot - Supermicro X11SSN-H/-E/-L User Manual

X11SSN-H/-E/-L User's Manual

4.5 Boot

Use this menu to configure Boot settings:
Boot Configuration
New Boot Option Policy
Use this feature to select the boot order for a newly detected device. The options are Default,
Place First, and Place Last.
Fast Boot
Enable this feature to reduce the time the computer takes to boot up. The computer will boot
with a minimal set of required devices. This feature does not have an effect on BBS boot
options in the Boot tab. The options are Disabled and Enabled.
*If the feature above is enabled, the next five features are available for configuration:
SATA Support
If Last Boot HDD Only is selected, only hard disk drives will be available during the boot up
POST. If All Sata Devices is selected, all SATA devices will be available during the boot up
POST. The options are Last Boot HDD Only and All Sata Devices.
VGA Support
Sue this feature to select which VGA drivers are installed during POST. Select Auto to install
Legacy OpRom. The options are Auto and EFI Driver.
86