So-Dimm Installation; So-Dimm Removal - Supermicro X11SSN-H/-E/-L User Manual

SO-DIMM Installation

1. Position the SO-DIMM module's bottom key so it aligns with the receptive point on the
slot.
2. Insert the SO-DIMM module vertically at about a 45 degree angle. Press down until the
module locks into place.
Insert this end first
3. The side clips will automatically secure the SO-DIMM module, locking it into place.
Locking clip

SO-DIMM Removal

1. Push the side clips at the end of slot to release the SO-DIMM module. Pull the SO-
DIMM module up to remove it from the slot.
Align
Press down until the module
locks into place.
27
Chapter 2: Installation