Assembly - Reebok EXERCISE CYCLE RBEX3976.0 User Manual

A
SSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench
driver .
Use the part drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LIST on page 21. The number following the paren-
theses is the quantity needed for assembly. Note: Some small parts may have been preattached. If a part is
not in the parts bag, check to see if it has been preattached.
M6 Washer
Washer (55)–14
(88)–7
M6 x 42mm Button
Screw (81)–4
1. Orient the Left Front Stabilizer (15) with the Wheel (17)
positioned as shown. Attach the Left Front Stabilizer to
the left side of the Frame (1) with three M8 x 16mm
Button Screws (54) and three M8 Split Washers (55).
Attach the Right Front Stabilizer (not shown) to the
right side of the Frame (1) in the same way.
M4 x 16mm
M8 Split Round Head
Screw (80)–4
M6 x 38mm Button
Screw (94)–3
M10 x 63mm Bolt Set (62)–1
M8 x 16mm Button
Screw (54)–6
1
15
17
55
54
4
and Phillips screw-
M8 x 19mm Button
Screw (77)–4
M8 x 50mm Button
Screw (52)–4
1
55
54