Cisco 836 Hardware Installation Manual page 47

Chapter 2 Installation
Select Start/Run, and type winipcfg in the Open field of the Run window. When
Step 8
the IP Config window appears, click Release to release the PC's IP address.
Then click Renew to renew the PC's IP address.
Alternatively, open the Run window, and enter ipconfig /release to release the
PC's IP address.Then enter ipconfig /renew to renew the IP address of the PC.
Open a web browser on the PC, and connect to a website.
Step 9
The router installation is complete when you have connected to a website.
78-15281-02
Cisco 836 Router and SOHO 96 Router Hardware Installation Guide
Mounting the Router
2-49